KTM 250 EXC-F (2020)
Motor · 5 Probleemoplossingen
Probleemoplossing - KTM 250 EXC-F (2020)
Veelvoorkomende problemen en oplossingen - ook zonder foutcode op het display.
| Probleem | Oorzaak | Oplossing |
|---|---|---|
| Oil leakage from fork legs | Dirt behind the dust wipers that is not removed can cause the oil seals to leak | 1. Raise motorcycle with jack stand 2. Disassemble front fork protector 3. Slide dust wipers down on both fork legs 4. Clean dust wipers and inner legs on both fork legs and lubricate with universal oil spray 5. Push dust wipers back into mounting position 6. Remove excess oil 7. Assemble front fork protector 8. Remove motorcycle from jack stand |
| Reduced braking performance due to oil or grease on brake discs | Oil or grease on the brake discs reduces braking performance | 1. Keep brake discs free of oil and grease at all times 2. Clean brake discs with brake cleaner if necessary |
| Play in the steering head bearing | Incorrect adjustment of the steering head bearing negatively affects riding behavior and can damage components | 1. Raise motorcycle with jack stand 2. Set handlebar in straight ahead position 3. Move fork legs back and forth in riding direction 4. If play is felt, adjust the steering head bearing according to your model specifications (EU/BR or Six Days) 5. Check play again 6. Remove motorcycle from jack stand |
| Blockage in steering range | Incorrect adjustment of the steering head bearing or damaged bearings | 1. Raise motorcycle with jack stand 2. Move handlebar back and forth over entire steering range 3. If blockage is felt, adjust the steering head bearing according to your model specifications 4. If necessary, inspect and replace the steering head bearing 5. Remove motorcycle from jack stand |
| Damage to bearing seats in the frame | Riding for extended periods with play in the steering head bearings damages the bearings and subsequently the bearing seats in the frame | 1. Correct play in the steering head bearing immediately 2. Raise motorcycle with jack stand 3. Adjust and inspect steering head bearing 4. Regularly check play to prevent further damage |
Community-vragen
Stel een vraag
De foutcodes zijn afkomstig uit de officiële handleiding van de fabrikant.