AVM FRITZ!Repeater 3000 AX
Wifi-repeater · 18 Probleemoplossingen
Probleemoplossing - AVM FRITZ!Repeater 3000 AX
Veelvoorkomende problemen en oplossingen - ook zonder foutcode op het display.
Overige problemen 8
| Probleem | Oorzaak | Oplossing |
|---|---|---|
Verbinding & Smart Home 9
| Probleem | Oorzaak | Oplossing |
|---|---|---|
| Wi-Fi connection to the FRITZ!Box cannot be established | Access type 'LAN bridge' activated (repeater was previously connected with an LAN cable) | Reset the repeater to factory settings (see page 74) |
| Wi-Fi connection to the FRITZ!Box cannot be established | Key lock of the FRITZ!Box activated | Deactivate the key lock in the FRITZ!Box user interface (http://fritz.box) under 'System / Keys and LEDs' |
| Wi-Fi connection to the FRITZ!Box cannot be established | MAC address filter of the FRITZ!Box activated | Enable the setting 'Allow all new Wi-Fi devices' in the FRITZ!Box. You can find the setting in the user interface (http://fritz.box) under 'Wi-Fi / Security' or 'Wi-Fi / Wireless Network'. The advanced view of the user interface must be enabled. |
| Wi-Fi connection to the FRITZ!Box cannot be established | WPS in FRITZ!Box disabled | Enable the setting 'WPS active' in the FRITZ!Box. You can find the setting in the user interface (http://fritz.box) under 'Wi-Fi / Security / WPS Quick Connect' |
| LED is off and LED flashes orange. Wi-Fi connection to the FRITZ!Box cannot be established | Access type 'LAN bridge' activated (repeater was previously connected with an LAN cable) | Reset the repeater to factory settings (see page 74) |
| Wi-Fi connection to another Wi-Fi router cannot be established | WPS function in the Wi-Fi router disabled | Enable WPS in the Wi-Fi router. Instructions can be found in the router documentation. |
| Wi-Fi connection to another Wi-Fi router cannot be established | MAC address filter of the Wi-Fi router activated | Disable the MAC address filter of the Wi-Fi router. Instructions can be obtained from the manufacturer, for example consult the device manual. After the Wi-Fi connection is established, you can re-enable the MAC address filter. |
| Wi-Fi connection to another Wi-Fi router cannot be established | Unsuitable Wi-Fi encryption set in the Wi-Fi router | Enable the WPA 3 or WPA2 (CCMP) encryption procedure in the Wi-Fi router. Instructions can be obtained from the manufacturer, for example consult the device manual. |
| Wi-Fi connection to another Wi-Fi router cannot be established | Access type 'LAN bridge' activated (LED flashes orange, repeater was previously connected with an LAN cable) | Reset the repeater to factory settings (see page 74) |
Stroomvoorziening & Elektronica 1
| Probleem | Oorzaak | Oplossing |
|---|---|---|
| All LEDs are off | Wi-Fi time schedule active (in access type 'Wi-Fi bridge') | Change the time schedule settings: 1. If the FRITZ!Repeater is in the mesh network of a FRITZ!Box: go to the FRITZ!Box user interface and select 'Wi-Fi / Time Schedule' 2. If the FRITZ!Repeater is not in the mesh network: go to the FRITZ!Repeater user interface and select 'Wi-Fi / Time Schedule' |
Community-vragen
Stel een vraag
De foutcodes zijn afkomstig uit de officiële handleiding van de fabrikant.