Wat betekent foutcode 5E bij Samsung WF0590NRW?

Water drains poorly or not at all from the washing machine. Oplossing: 1. Open the filter cover panel at the bottom front of the machine. 2. Unscrew the emergency drain plug by turning it counterclockwise. 3. Pull the drain tube and let water drain into a bucket. 4. Unscrew the debris filter using a coin or key. 5. Clean the debris filter and the interior of the drain hose. 6. Reinstall the debris filter, emergency drain plug, and drain tube. 7. Close the filter cover. If water still doesn't drain after 30 minutes, the drain hose may be frozen - pour hot water into the drum and wait about one hour to defrost.

Wat betekent foutcode dE bij Samsung WF0590NRW?

Door/hublot cannot be opened - temperature inside the machine is too high or the drum is filled with water. Oplossing: 1. Check if the internal air temperature exceeds 70°C or water temperature exceeds 55°C after the cycle - if so, wait for the temperature to decrease. 2. If the drum is filled with water, select the Spin/Essorage program to drain the water, then you can open the door. 3. On some models, you can only open the door when 'End' is displayed or the end-of-cycle signal sounds. 4. Do not force the door open as this may damage the machine and create a safety hazard.

Samsung WF0590NRW Foutcodes

Foutcodes - Samsung WF0590NRW

Deze codes worden op het display van uw apparaat weergegeven wanneer er een probleem wordt gedetecteerd.

2 van 2

Foutcode	Beschrijving	Oplossing	Ernst
5E KRITIEK	Water drains poorly or not at all from the washing machine	1. Open the filter cover panel at the bottom front of the machine. 2. Unscrew the emergency drain plug by turning it counterclockwise. 3. Pull the drain tube and let water drain into a bucket. 4. Unscrew the debris filter using a coin or key. 5. Clean the debris filter and the interior of the drain hose. 6. Reinstall the debris filter, emergency drain plug, and drain tube. 7. Close the filter cover. If water still doesn't drain after 30 minutes, the drain hose may be frozen - pour hot water into the drum and wait about one hour to defrost.	KRITIEK
dE WAARSCHUWING	Door/hublot cannot be opened - temperature inside the machine is too high or the drum is filled with water	1. Check if the internal air temperature exceeds 70°C or water temperature exceeds 55°C after the cycle - if so, wait for the temperature to decrease. 2. If the drum is filled with water, select the Spin/Essorage program to drain the water, then you can open the door. 3. On some models, you can only open the door when 'End' is displayed or the end-of-cycle signal sounds. 4. Do not force the door open as this may damage the machine and create a safety hazard.	WAARSCHUWING