Ahma a890 aura

Overige problemen 8

Probleem	Oorzaak	Oplossing

3 meer tonen

Onderhoud & Verzorging 1

Probleem	Oorzaak	Oplossing
Excessive foam in detergent dispenser	Too much detergent has been used	Press the Start/Pause button. To stop foam formation, mix one tablespoon of rinse aid with half a liter of water and pour it into the detergent dispenser. Press the Start/Pause button after 5-10 minutes. Dispense the appropriate amount of detergent on the next wash cycle.

Prestaties & Werking 2

Probleem	Oorzaak	Oplossing
Machine vibrates/shakes	Machine contains too much laundry or clothes are not evenly distributed inside the machine, or machine is touching a fixed object	Do not exceed the machine's maximum load capacity and place clothes inside the machine separately and well fluffed. Prevent the machine from contacting any objects.
Spin cycle does not start at all or starts with delay	Unbalanced load control system attempts to distribute laundry evenly in the drum	Place laundry in the drum as evenly distributed as possible and well fluffed on the next wash cycle.

Spoelresultaat & Droging 3

Probleem	Oorzaak	Oplossing
Poor washing results	Detergent used is unsuitable, laundry is too dirty for the selected program, insufficient detergent dosage, laundry load exceeds maximum capacity, water may be hard, or clothes are not evenly distributed inside the machine	Use only detergent intended for automatic washing machines. Select an appropriate program. Use more detergent and dose according to instructions. Load the machine with only as much laundry that the maximum capacity is not exceeded. Follow the dosage instructions provided by the detergent manufacturer. Place clothes inside the machine separately and well fluffed.
Detergent residue on clothes	Some detergents contain insoluble substances that can stick to clothes	Use additional rinse cycle or remove residue from clothes with a brush after drying.
Gray stains on clothes	Stains may originate from oil, grease, or lubricant	Use the maximum detergent amount recommended by the manufacturer on the next wash cycle.

Waterproblemen 1

Probleem	Oorzaak	Oplossing
Water drains from machine as it fills	Drain hose outlet is positioned too low relative to the machine	Position the drain hose at an appropriate height.