Whirlpool DELX7 0113
Wasdroger · 3 Probleemoplossingen
Probleemoplossing - Whirlpool DELX7 0113
Veelvoorkomende problemen en oplossingen - ook zonder foutcode op het display.
Onderhoud & Verzorging 2
| Probleem | Oorzaak | Oplossing |
|---|---|---|
| Bottom filter is dirty | Bottom filter has not been cleaned and collects dust and lint | 1. Turn off the dryer and unplug it from the outlet 2. Open the bottom panel 3. Turn the locking bars on the left and right of the bottom filter downward to horizontal position 4. Hold the bottom filter by the handle and pull it out 5. Clean the bottom filter under running water and wipe away dust and lint 6. Clean the filter chamber of the dryer with a damp cloth or carefully with a vacuum cleaner 7. Place the bottom filter back 8. Turn the locking bars upward to vertical position 9. Close the bottom panel |
| Door filter is dirty | Door filter contains lint and has not been cleaned after the drying cycle | 1. Turn off the dryer and unplug it from the outlet 2. Open the door 3. Pull the door filter upward to remove it 4. Press the button to open the door filter 5. Remove the lint from the filter 6. Close the filter and place it back in the correct direction so it fits fully in the filter chamber |
Waterproblemen 1
| Probleem | Oorzaak | Oplossing |
|---|---|---|
| Water tank is full | Water tank was not emptied after the drying cycle | 1. Turn off the dryer and unplug it from the outlet 2. Grab the water reservoir by the handle 3. Carefully pull the water reservoir out of the dryer 4. Hold the full water reservoir with both hands 5. Empty the water 6. Place the container back in the dryer by sliding it back 7. Ensure it is properly installed |
Community-vragen
Stel een vraag
De foutcodes zijn afkomstig uit de officiële handleiding van de fabrikant.