Whirlpool ADG 9527/1
Vaatwasser · 5 Display-foutcodes
Foutcodes - Whirlpool ADG 9527/1
Deze codes worden op het display van uw apparaat weergegeven wanneer er een probleem wordt gedetecteerd.
| Foutcode | Beschrijving | Oplossing | Ernst |
|---|---|---|---|
| F1 | "F1"/START indicator flashes once: pour half a litre of warm water into the bottom of the dishwasher. "F6"/START indicator flashes 6 times: the appliance must remain at an ambient temperature of min. 5°C for at least 24 hours. | - | |
| F4 | ... shows "F4" on the display or - The filters must not be dirty or clogged. the START indicator lamp flashes 4 times - The drain hose must not be kinked. | - | |
| F6 | "F6"/START indicator flashes 6 times: the appliance must remain at an ambient temperature of min. 5°C for at least 24 hours. After eliminating these faults, RESET the appliance (see chapter "5. What to do if..."). | - | |
| F7 | ... shows "F7" on the display or - The water tap must be fully open during water inlet (minimum the START indicator lamp flashes 7 times capacity: 0.5 litres per minute). | - | |
| F8 | ... shows "F8" on the display or - The filters must not be dirty or clogged. the START indicator lamp flashes 8 times - Concave items (e.g. bowls, cups) must be arranged facing | - |
Community-vragen
Stel een vraag
De foutcodes zijn afkomstig uit de officiële handleiding van de fabrikant.