V-Zug GS55Sin

Overige problemen 12

Probleem	Oorzaak	Oplossing

7 meer tonen

Onderhoud & Verzorging 3

Probleem	Oorzaak	Oplossing
Excessive foaming in the dishwasher	Use of high-foaming detergent, spilled rinse aid or dish soap	Wipe up spilled rinse aid with a cloth. Remove foam with approximately 1dl vinegar. Cancel error message by pressing the button. Select the 'Pre-rinse' program.
Clogged drainage system	Filter system is clogged, drain hose is kinked or pinched, drain pump or siphon is clogged	Clean filter system. Resolve problem. Cancel error message by pressing the button. Restart program.
Unpleasant odor coming from the dishwasher	Various possible reasons	Clean filter system. Add detergent and run program. Select a more powerful program. Fill salt container with sufficient regeneration salt.

Prestaties & Werking 1

Probleem	Oorzaak	Oplossing
Dishes are not clean	Incorrect programming or loading, dirty filter system, clogged spray arms, incorrect amount of detergent, incorrect water hardness setting, salt container empty	Select a more powerful program. Load basket differently, avoid dead spots. Clean filter system and reinstall correctly. Check if spray arms are clogged or dirty. Use correct amount of detergent or try different detergent. Check water hardness setting. Fill salt container with regeneration salt.

Stroomvoorziening & Elektronica 2

Probleem	Oorzaak	Oplossing
The dishwasher does not start	Various possible reasons: door not closed, plug not in outlet, fuse blown, child lock activated, Demo mode enabled	Close dishwasher door. Insert plug into outlet. Check fuse or circuit breaker. Consult section 'Operation with child lock activated'. For Demo mode: press and hold buttons and simultaneously press button. Cancel error message by pressing the button.
Stroomuitval	Onderbreking in de stroomtoevoer	Lopend programma wordt onderbroken. Na herstel van stroomtoevoer wordt het programma hervat.

Spoelresultaat & Droging 5

Probleem	Oorzaak	Oplossing
White haze on dishes	Water hardness, insufficient rinse aid, incorrect detergent amount	Clean dishwasher with dishwasher maintenance product. Fill salt container and run program without dishes. Use correct amount of detergent or try different type. Fill rinse aid container. Increase rinse aid dosage. Check water hardness setting. Change setting without detergent.
Streaks or milky spots on dishes	Too high rinse aid dosage	Reduce rinse aid dosage. Change setting without detergent.
Serviesgoed is nat en dof of heeft waterplekken	Onvoldoende spoelglans	Spoelglansvat opvullen. Dosering spoelglans verhogen. Ander spoelglans gebruiken. Vaatwasserdeur niet openen tot programma is voltooid (drievoudige akoestische signaal en display/functielicht gaat uit). Zonder reinigingsmiddel instelling wijzigen.
Roestplekken op het serviesgoed	Roest komt uit een ander bron bijv. bestek, pannen, waterleidingen. Vaatwasser is van roestvrijstaal gemaakt.	Zoutvat opvullen met regeneratiezout en 'Pre-rinse'-programma zonder serviesgoed uitvoeren.
Reinigingsmiddel is niet volledig opgelost	Spraiarmen zijn verstopt of vuil, verkeerd type reinigingsmiddel, reinigingsmiddelhouder kapot, filtersysteem verstopt	Controleer of spraiarmen verstopt of vuil zijn. Ander type reinigingsmiddel proberen. Reinigingsmiddelhouder controleren. Controleer of filtersysteem verstopt is.

Temperatuurproblemen 1

Probleem	Oorzaak	Oplossing
Water inlet is too hot	Water inlet temperature higher than 79°C (when connected to hot water supply)	Have a plumber lower the temperature of the water inlet.

Waterproblemen 1

Probleem	Oorzaak	Oplossing
Water problems	Water tap is closed, inlet filter is clogged, water supply interruption, water pressure is too low	Resolve problem or wait until water supply is restored. Cancel error message by pressing the button. Restart program.