| LOW SALT indicator light flashes |
Salt dispenser is empty or running low |
Fill the salt dispenser up to the edges with refined salt (approximately 2 kg). Remove the lower rack, unscrew the cap anti-clockwise, position the funnel and fill. After adding salt, run a wash cycle immediately without crockery to remove any leaked salt solution. |
| LOW RINSE AID indicator light flashes |
Rinse aid dispenser is empty |
Open the rinse aid dispenser by turning the lid (G) anti-clockwise and pour in rinse aid, ensuring it does not overflow. If it overflows, clean immediately with a sponge. Never pour rinse aid directly into the appliance tub. |
| Blocked filter alarm - dishwasher stops operating |
High level of dirt contained in the filters |
Clean the filters regularly. Remove filters by pulling the handle upwards. Remove largest pieces of residue from semicircular plate A and glass B by rinsing under running water. Once a month, clean the entire filter assembly including semicircular plate A, glass B and cylinder C using a small non-metallic brush. |
| Unpleasant odours forming in the machine |
Food becoming trapped in the seals around the door and detergent dispensers |
Clean the seals around the door and detergent dispensers regularly using a damp sponge. |
| Sprayer arms not spraying water effectively |
Food residue encrusted onto the sprayer arms blocking the holes |
Check the sprayer arms from time to time and clean them with a small non-metallic brush. |
