Euro Appliances EED614TX
Vaatwasser · 24 Probleemoplossingen
Probleemoplossing - Euro Appliances EED614TX
Veelvoorkomende problemen en oplossingen - ook zonder foutcode op het display.
Overige problemen 13
| Probleem | Oorzaak | Oplossing |
|---|---|---|
| Decorations and ornaments on kitchen utensils are being erased | Decorated glassware and decorated lustre porcelains not suitable for dishwasher | Do not wash decorated glasses and decorated lustre porcelains in the dishwasher. |
| Dishes are scratched | Dishes not placed orderly, or kitchen utensils contain or are made of aluminium | When placing glasses and glassware into the basket, lean them against edges or racks of the basket or glass support tines, not against other dishes. Do not wash kitchen utensils containing or made of aluminium in dishwasher. |
| Keukengerei breekt | Vaat is niet ordelijk geplaatst of manden zijn overbelast | Laad de vaat zoals beschreven in de gebruiksaanwijzing. Overbelast de manden niet meer dan hun capaciteit. |
Onderhoud & Verzorging 6
| Probleem | Oorzaak | Oplossing |
|---|---|---|
| Lime traces remain on dishes and glassware gains a misty appearance | Insufficient rinse aid | Check the rinse aid indicator and add rinse aid if necessary. Increase the rinse aid setting if there is enough amount of rinse aid in the machine. |
| There is a different odour in the machine | New machine, filters are clogged, or dirty dishes kept in dishwasher for 2-3 days | Run a couple of washes for new machine odour to fade. Clean the filter system regularly. Remove remnants on dishes and run Pre-wash program without detergent every 2 days. Do not close the door completely to avoid odour build up. Use commercially available odour removers or machine cleaners. |
| Rust, discoloration or surface deterioration occurs on dishes | Salty food remnants on dishes, electric installation not grounded, intensive cleansers used, metal items used for unintended purposes, cutlery made of low quality stainless steel, or corroded kitchen utensils washed in dishwasher | Remove dirt by pre-wash or wash without waiting. Check if machine is connected to grounding line. Do not wash dishes with bleach. Use metal kitchen utensils only for intended purposes. Do not wash low quality stainless steel or already corroded items in dishwasher. |
| Detergent remains in detergent dispenser | Detergent dispenser was damp, detergent added long before washing, detergent dispenser lid opening prevented during washing, detergent stored in humid conditions, or impeller holes clogged | Dry detergent dispenser well before filling. Add detergent shortly before start-up of washing. Place dishes so they do not prevent dispenser lid from opening. Store detergent in a closed container in dry places. Clean impellers regularly. |
| Er blijft een spoor op glazen achter dat lijkt op melkvlekken en niet kan worden verwijderd wanneer met de hand wordt geveegd. Een blauwachtig/regenboogachtig uiterlijk treedt op wanneer het glas naar het licht wordt gericht | Overmatig spoelmiddel wordt gebruikt | Senk de instelling van het spoelmiddel. Reinig het gemorste spoelmiddel wanneer u spoelmiddel toevoegt. |
| Schuim vormt zich in de machine | Vaat is gewassen met handwasdetergent maar niet gespoeld voordat deze in de machine wordt geplaatst, spoelmiddel is in de machine gemorst, of het deksel van de spoelmiddelreservoir is open gebleven | Verwijder grove vuil op vaat onder stromend water met tissues of vork; niet nodig om met de hand te wassen. Zorg ervoor dat spoelmiddel niet in de machine wordt gemorst bij het vullen. Reinig gemorst spoelmiddel met tissues/handdoek. Zorg ervoor dat het deksel van de spoelmiddelreservoir na het toevoegen van spoelmiddel gesloten is. |
Prestaties & Werking 3
| Probleem | Oorzaak | Oplossing |
|---|---|---|
| Dishes are not washed clean | Dishes not placed orderly, unsuitable program, impellers stuck or clogged, filters clogged or installed incorrectly, baskets overloaded, detergent stored in humid conditions, insufficient detergent, or insufficient rinse aid | Load the dishes as described in the user manual. Select a program with a higher temperature and cycle time. Turn the impellers by hand to ensure they rotate freely. Clean the impellers and filters regularly. Do not overload baskets. Store detergent in a closed container. Adjust detergent amount according to soiling degree. Check rinse aid indicator and increase rinse aid setting if necessary. |
| Dishes are not dry at the end of cycle | Dishes not placed orderly, insufficient rinse aid, machine unloaded immediately after program, unsuitable program, or surface quality of kitchen utensils deteriorated | Place dishes so water does not accumulate. Check and add rinse aid if necessary. Do not unload right after washing; slightly open door and wait for steam to evacuate. Select program with longer duration. Do not wash kitchen utensils with deteriorated surfaces. |
| Tea, coffee or lipstick stains remain on dishes | Unsuitable program selected, surface quality of kitchen utensils deteriorated, or detergent stored under unsuitable conditions | Select a program with a higher temperature and cycle time. Do not wash kitchen utensils with deteriorated surfaces. Store powder detergent in a closed container in dry places, or use tablet detergents. |
Stroomvoorziening & Elektronica 1
| Probleem | Oorzaak | Oplossing |
|---|---|---|
| Machine does not start | Power cable is unplugged, fuse is blown, water is cut, door is open, or On/Off button is not pressed | Check if the power cable is plugged in. Check the fuses in your house. Make sure that the water inlet tap is open. Make sure that you have closed the door of the machine. Make sure that you have turned on the machine by pressing the On/Off button. |
Waterproblemen 1
| Probleem | Oorzaak | Oplossing |
|---|---|---|
| Water blijft aan het einde van het programma in de vaatwasser achter | Filters zijn verstopt of afvoerslang is verstopt/geblokkeerd | Controleer of het filtersysteem schoon is en reinig het regelmatig. Controleer de afvoerslang. Verwijder indien nodig de afvoerslang, verwijder de verstopping en plaats deze terug zoals geïllustreerd in de gebruiksaanwijzing. |
Community-vragen
Stel een vraag
De foutcodes zijn afkomstig uit de officiële handleiding van de fabrikant.