Probleemoplossing - Blomberg LDF52320W

Veelvoorkomende problemen en oplossingen - ook zonder foutcode op het display.

23 van 23

Overige problemen 11

Probleem Oorzaak Oplossing

Onderhoud & Verzorging 3

Probleem Oorzaak Oplossing
There is a different odour in the machine New machine with peculiar odour, clogged filters, or dirty dishes kept in dishwasher for 2-3 days Odour will fade after a couple of washes. Check if filter system is clean and clean regularly. If not starting machine right after loading, remove remnants and run Prewash programme without detergent every 2 days. Do not close door completely to avoid odour build-up. Use commercially available odour removers or machine cleaners.
Detergent remains in detergent dispenser Detergent dispenser was damp, detergent added long before washing, detergent dispenser lid opening prevented during washing, unsuitable detergent storage, or clogged impeller holes Dry the detergent dispenser well prior to filling. Add detergent shortly before start-up. Place dishes so they do not prevent detergent dispenser lid from opening. Store powder detergent in a closed container or use tablet detergents. Clean impellers regularly.
Schuim vormt zich in de machine Vaat gewassen met handafwasmiddel maar niet gespoeld voor plaatsing in machine, spoelglans in machine gemorst, of deksel van spoelglans-reservoir open gelaten Handmatig afwassen van vaat is niet nodig; het verwijderen van grof vuil onder de kraan met tissuepapier of vork is voldoende. Zorg dat spoelglans niet morst bij het vullen. Morsen spoelglans met tissuepapier reinigen. Zorg dat spoelglans-reservoir deksel na toevoegen van spoelglans gesloten is.

Prestaties & Werking 5

Probleem Oorzaak Oplossing
Dishes are not washed clean Dishes not placed orderly, unsuitable programme, stuck impellers, clogged impeller holes or filters, incorrect filter installation, overloaded baskets, unsuitable detergent storage, insufficient detergent or rinse aid, or detergent dispenser lid left open Load the dishes as described in the user manual. Select a programme with higher temperature and cycle time. Turn the lower and upper impellers by hand to ensure they rotate freely. Clean the impeller holes and filters regularly. Check and correct filter installation. Do not overload baskets. Store powder detergent in a closed container or use tablet detergents. Adjust detergent amount according to soil degree. Check rinse aid indicator and add if necessary. Close the detergent dispenser lid tightly.
Dishes are not dry at the end of cycle Dishes not placed orderly, insufficient rinse aid, machine unloaded too soon, unsuitable programme, or deteriorated surface quality of kitchen utensils Place dishes so water does not accumulate in them. Check rinse aid indicator and add if necessary. Increase rinse aid setting if enough is present. Do not unload right after washing; slightly open door and wait for steam evacuation, then unload from lower basket first. Select programmes with longer duration for higher drying performance. Do not wash kitchen utensils with deteriorated surfaces.
Tea, coffee or lipstick stains remain on dishes Unsuitable programme, deteriorated surface quality of kitchen utensils, or unsuitable detergent storage conditions Select a programme with higher temperature and cycle time. Do not wash kitchen utensils with deteriorated surfaces. Store powder detergent in a closed container or use tablet detergents.
Dishes are scratched Kitchen utensils containing aluminium, salt leakage, low water hardness setting or insufficient salt level, or dishes not placed orderly Do not wash kitchen utensils containing or made of aluminium. Pay attention not to spill salt and ensure salt reservoir lid is tightly closed. Run prewash programme to remove spilled salt. Measure water hardness and check setting. When placing glasses, lean them against edges or racks of basket, not against other dishes.
Keukengereedschap is gebroken Vaat niet ordelijk in de machine geplaatst Laad de vaat in zoals beschreven in de gebruikershandleiding.

Stroomvoorziening & Elektronica 1

Probleem Oorzaak Oplossing
Machine does not start Power cable is unplugged, fuse is blown, water is cut off, door is open, or On/Off button is not pressed Check if the power cable is plugged in. Check the fuses in your house. Make sure that the water inlet tap is open. Close the door of the machine. Press the On/Off button to turn on the machine.

Waterproblemen 3

Probleem Oorzaak Oplossing
Lime traces remain on dishes and glassware gains a misty appearance Insufficient rinse aid, low water hardness setting or insufficient salt level, or salt leakage Check rinse aid indicator and add if necessary. Increase rinse aid setting. Measure water hardness and check the water hardness setting. Pay attention not to spill salt around the salt filling hole. Ensure salt reservoir lid is tightly closed. Run the prewash programme to remove spilled salt.
Rust, discoloration or surface deterioration occurs on dishes Salt leakage, salty food remnants on dishes for long time, electric installation not grounded, intensive cleansers used, metal items used for unintended purposes, cutlery made of low quality stainless steel, or already corroded items washed Pay attention not to spill salt. Ensure salt reservoir lid is tightly closed. Run prewash programme to remove spilled salt. Remove dirt from cutlery by prewash before keeping waiting. Check if machine is connected to actual grounding line. Do not wash dishes with bleach. Do not use metal kitchen utensils for purposes other than intended. Do not wash low quality stainless steel or already corroded items in dishwasher.
Een smeer blijft op glazen die lijkt op melksteen en kan niet worden verwijderd bij het afvegen met de hand. Een blauwachtige/regenboogachtige verschijning treedt op wanneer het glas naar het licht wordt gericht Overmatige hoeveelheid spoelglans gebruikt of corrosie op glas vanwege zacht water Sendspoelglans-instelling verlagen en morsen spoelglans reinigen. Waterhardheid passend meten. Als leidingwater zacht is (minder dan 5 dH), geen zout gebruiken. Programma's kiezen die in hogere temperaturen wassen (60-65°C). Commercieel verkrijgbare glazenbeschermende reinigingsmiddelen gebruiken.

Community-vragen

Stel een vraag

Was ist 2 + 5?
De foutcodes zijn afkomstig uit de officiële handleiding van de fabrikant. Bezoek de officiële Blomberg website voor actuele informatie en ondersteuning.

Andere Blomberg producten

Foutcode-assistent Online
Hallo! Ik ben uw foutcode-assistent voor de Blomberg LDF52320W. Voer een foutcode in en ik leg u uit wat het betekent en hoe u het probleem kunt oplossen.