BEKO DFS05W13S
Vaatwasser · 21 Probleemoplossingen
Probleemoplossing - BEKO DFS05W13S
Veelvoorkomende problemen en oplossingen - ook zonder foutcode op het display.
Overige problemen 10
| Probleem | Oorzaak | Oplossing |
|---|---|---|
Onderhoud & Verzorging 4
| Probleem | Oorzaak | Oplossing |
|---|---|---|
| There is a different odour in the machine | New machine has peculiar odour, filters are clogged, or dirty dishes are kept in dishwasher for 2-3 days | The peculiar odour will fade out after a couple of washes. Clean the filter system regularly. If not starting machine right after putting dishes in, remove remnants and run prewash programme without detergent every 2 days. Do not close the door completely to avoid odour build up. Use commercially available odour removers or machine cleaners. |
| Detergent remains in detergent dispenser | Detergent dispenser was damp when adding detergent, detergent is added long before washing process, opening of detergent dispenser lid is prevented during washing, detergent is stored under unsuitable conditions, or impeller holes are clogged | Make sure that the detergent dispenser is dried well prior to filling. Add detergent shortly before start-up of washing. Place dishes in a way that will not prevent the detergent dispenser lid from opening. Store detergent in closed containers in dry places. Clean the impellers regularly. |
| Dishes are scratched | Salt leakage exists, water hardness setting is low, salt level is insufficient, or dishes are not placed orderly in the machine | Pay attention not to spill salt around the salt filling hole. Make sure salt reservoir lid is tightly closed. Run prewash programme to remove spilled salt. Measure the hardness of the supply water and check the water hardness setting. When placing glasses and other glassware, lean them against the edges or racks of the basket or the glass support tines, not against other dishes. |
| Schuim vormt zich in de machine | Borden worden met handafwasmiddel gewassen maar niet gespoeld voordat ze in de machine worden geplaatst, spoelmiddel is in de machine gemorst, of het deksel van het spoelmiddelreservoir is open gelaten | Was de borden niet met de hand voordat u ze in de machine plaatst. Verwijder grof vuil onder stromend water met een tissue of vork. Let erop dat spoelmiddel niet in de machine wordt gemorst bij het vullen. Maak morst spoelmiddel schoon met tissue of handdoek. Zorg ervoor dat het deksel van het spoelmiddelreservoir gesloten is. |
Prestaties & Werking 3
| Probleem | Oorzaak | Oplossing |
|---|---|---|
| Dishes are not washed clean | Dishes are not placed orderly, unsuitable programme, impellers are stuck or clogged, filters are clogged or installed incorrectly, baskets are overloaded, detergent is stored under unsuitable conditions, detergent is not sufficient, rinse aid is not sufficient, or detergent dispenser lid is left open | Load the dishes as described in the user manual. Select a programme with a higher temperature and cycle time. Turn the lower and upper impellers by hand to make sure that they rotate freely. Clean the impellers and filter system regularly. Do not overload the baskets. Store detergent in closed containers. Adjust the amount of detergent according to soiling degree. Check rinse aid indicator and add if necessary. Make sure that the detergent dispenser lid is closed tightly. |
| Dishes are not dry at the end of cycle | Dishes are not placed orderly, rinse aid is not sufficient, machine is unloaded right after the programme is over, selected programme is unsuitable, or surface quality of kitchen utensils is deteriorated | Place dishes in a way that no water will accumulate in them. Check rinse aid indicator and add if necessary. Do not unload machine right after washing process. Slightly open the door and wait for evacuation of steam. Unload after pieces cool down. Start unloading from the lower basket. Select programmes with longer duration for higher drying performance. Do not wash kitchen utensils with deteriorated surfaces. |
| Tea, cafe or lipstick stains remain on dishes | Selected programme is unsuitable, surface quality of kitchen utensils is deteriorated, or detergent is stored under unsuitable conditions | Select a programme with a higher temperature and cycle time. Do not wash kitchen utensils with deteriorated surfaces. Store detergent in closed containers in dry places. |
Stroomvoorziening & Elektronica 1
| Probleem | Oorzaak | Oplossing |
|---|---|---|
| Machine does not start | Power cable is unplugged, fuse is blown, water is cut, door is open, or On/Off button is not pressed | Check if the power cable is plugged in. Check the fuses in your house. Make sure that the water inlet tap is open. Make sure that you have closed the door of the machine. Make sure that you have turned on the machine by pressing the On/Off button. |
Waterproblemen 3
| Probleem | Oorzaak | Oplossing |
|---|---|---|
| Lime traces remain on dishes and glassware gains a misty appearance | Rinse aid is not sufficient, water hardness setting is low, salt level is insufficient, or salt leakage exists | Check rinse aid indicator and add if necessary. Increase rinse aid setting. Measure the hardness of the supply water and check the water hardness setting. Pay attention not to spill salt around the salt filling hole. Make sure that the salt reservoir lid is tightly closed. Run the prewash programme to remove spilled salt. |
| Rust, discoloration or surface deterioration occurs on dishes | Salt leakage exists, salty food remnants have remained on dishes, electric installation is not grounded, intensive cleansers are used, metal items are used for purposes other than intended, cutlery are made of low quality stainless steel, or kitchen utensils that are already corroded are washed | Pay attention not to spill salt around the salt filling hole. Make sure salt reservoir lid is tightly closed. Run prewash programme to remove spilled salt. Remove dirt by prewash if cutlery soiled with salty food is kept waiting. Check if machine is connected to actual grounding line. Do not wash dishes with bleach. Do not use metal kitchen utensils out of their intended uses. Do not wash low quality stainless steel or already corroded items in dishwasher. |
| A smear remains on glasses that resembles milk stain which can not be removed when wiped by hand. A bluish / rainbow appearance occurs when the glass is pointed to light | Excessive rinse aid is used or corrosion has occurred on glass due to soft water | Lower rinse aid setting. Clean spilled rinse aid when adding rinse aid. Measure the hardness of the supply water. If supply water is soft (<5 dH), do not use salt. Choose programmes that wash in higher temperatures (e.g. 60-65°C). Use glass protective detergents that are commercially available. |
Community-vragen
Stel een vraag
De foutcodes zijn afkomstig uit de officiële handleiding van de fabrikant.