BEKO BDFS26123WQ
Vaatwasser · 23 Probleemoplossingen
Probleemoplossing - BEKO BDFS26123WQ
Veelvoorkomende problemen en oplossingen - ook zonder foutcode op het display.
Overige problemen 11
| Probleem | Oorzaak | Oplossing |
|---|---|---|
| Decorations and ornaments on kitchen utensils are being erased | Decorated glasses and decorated lustre porcelains are not suitable for washing in the dishwasher | Decorated glasses and decorated lustre porcelains are not suitable for washing in the dishwasher. Check manufacturer recommendations for glassware and porcelain tableware items. |
Onderhoud & Verzorging 3
| Probleem | Oorzaak | Oplossing |
|---|---|---|
| There is a different odour in the machine | Filters are clogged or dirty dishes are kept in dishwasher for 2-3 days | Check if the filter system is clean and clean regularly. If you are not going to start the machine right after you have put the dishes into it, remove the remnants on the dishes and run the Prewash programme without detergent every 2 days. Do not close the door of the machine completely to avoid odour build up. You can also use commercially available odour removers or machine cleaners. |
| Detergent remains in detergent dispenser | Detergent dispenser was damp when adding detergent, detergent is added long before the washing process, opening of the detergent dispenser lid is prevented during washing, detergent is stored under unsuitable conditions, or impeller holes are clogged | Make sure that the detergent dispenser is dried well prior to filling it with detergent. Pay attention to add detergent shortly before start-up of the washing. Place the dishes in a way that will not prevent the detergent dispenser lid from opening. If you are using powder detergent, do not store the detergent package in humid places. Keep it in a closed container or use tablet detergents. Clean the impellers regularly. |
| Er vormt zich schuim in de machine | Vaat wordt met de hand gewassen met handafwasmiddel maar niet gespoeld voordat deze in de machine wordt geplaatst, spoelmiddel is in de machine gemorst bij het toevoegen van spoelmiddel, of het deksel van het spoelmiddelvat is opengelaten | Het is niet nodig om de vaat met de hand schoon te maken voordat u deze in de machine plaatst. Het verwijderen van grofvuil van de vaat onder stromend water, met behulp van tissue of een vork, is voldoende. Zorg ervoor dat spoelmiddel niet in de machine morst wanneer u deze vult. Maak eventueel gemorst spoelmiddel schoon met behulp van tissue/handdoek. Zorg ervoor dat het deksel van het spoelmiddelvat gesloten is nadat u spoelmiddel hebt toegevoegd. |
Prestaties & Werking 4
| Probleem | Oorzaak | Oplossing |
|---|---|---|
| Dishes are not washed clean | Dishes not placed orderly, unsuitable programme, impellers stuck or clogged, filters clogged or installed incorrectly, baskets overloaded, detergent stored under unsuitable conditions, insufficient detergent, insufficient rinse aid, or detergent dispenser lid left open | Load the dishes as described in the user manual. Select a programme with a higher temperature and cycle time. Turn the lower and upper impellers by hand to make sure that they rotate freely. Clean the impellers regularly. Check if the filter system is clean and clean regularly. Make sure the filter system is installed correctly. Do not overload the baskets. Store detergent in a closed container or use tablet detergents. Adjust the amount of detergent according to soiling degree. Check the rinse aid indicator and add rinse aid if necessary. Make sure that the detergent dispenser lid is closed tightly. |
| Dishes are not dry at the end of cycle | Dishes not placed orderly, insufficient rinse aid, machine unloaded right after programme is over, unsuitable programme, or surface quality of kitchen utensils is deteriorated | Place your dishes in a way that no water will accumulate in them. Check the rinse aid indicator and add rinse aid if necessary. Do not unload your machine right after washing process is completed. Slightly open the door and wait for evacuation of the steam inside. Unload the dishes after the pieces cool down. Start unloading process from the lower basket. Select programmes with longer duration for higher drying performance. Do not wash kitchen utensils with deteriorated surfaces in dishwasher. |
| Tea, coffee or lipstick stains remain on dishes | Selected programme is unsuitable, surface quality of the kitchen utensils is deteriorated, or detergent is stored under unsuitable conditions | Select a programme with a higher temperature and cycle time. Do not wash kitchen utensils with deteriorated surfaces in dishwasher. If you are using powder detergent, do not store the detergent package in humid places. Keep it in a closed container or use tablet detergents. |
| Keukengereedschap is kapot | Vaat is niet ordelijk in de machine geplaatst | Laad de vaat zoals beschreven in de gebruiksaanwijzing. Bij het plaatsen van glazen en ander glaswerk in het mandje, leunt u deze niet tegen ander servies maar tegen de randen of tralies van het mandje of de glasondersteuningsstiften. |
Stroomvoorziening & Elektronica 1
| Probleem | Oorzaak | Oplossing |
|---|---|---|
| Machine does not start | Power cable is unplugged, fuse is blown, water is cut, door is open, or On/Off button is not pressed | Check if the power cable is plugged in. Check the fuses in your house. Make sure that the water inlet tap is open. Make sure that you have closed the door of the machine. Make sure that you have turned on the machine by pressing the On/Off button. |
Waterproblemen 4
| Probleem | Oorzaak | Oplossing |
|---|---|---|
| Lime traces remain on dishes and glassware gains a misty appearance | Rinse aid is not sufficient, water hardness setting is low or salt level is insufficient, or salt leakage exists | Check the rinse aid indicator and add rinse aid if necessary. Increase the rinse aid setting if there is enough amount of rinse aid in the machine. Measure the hardness of the supply water appropriately and check the water hardness setting. Pay attention not to spill salt around the salt filling hole while adding salt. Make sure that the salt reservoir lid is tightly closed after finishing the filling process. Run the prewash programme to remove the salt that spilled inside the machine. |
| Rust, discoloration or surface deterioration occurs on dishes | Salt leakage exists, salty food remnants have remained on dishes for a long time, electric installation is not grounded, intensive cleansers are used, metal items are used for purposes other than their intended uses, cutlery are made of low quality stainless steel, or corroded kitchen utensils are washed in dishwasher | Pay attention not to spill salt around the salt filling hole while adding salt. Make sure that the salt reservoir lid is tightly closed. Run the prewash programme to remove the salt that spilled inside the machine. Remove dirt by prewash or wash without being kept waiting. Check if your machine is connected to the actual grounding line. Do not wash your dishes with bleach. Do not use metal kitchen utensils out of their intended uses. Do not wash low quality stainless steel or corroded items in dishwashers. |
| Dishes are scratched | Kitchen utensils that contains or are made of aluminium, salt leakage exists, water hardness setting is low or salt level is insufficient, or dishes are not placed orderly in the machine | Do not wash kitchen utensils that contains or are made of aluminium in dishwasher. Pay attention not to spill salt around the salt filling hole while adding salt. Make sure that the salt reservoir lid is tightly closed. Run the prewash programme to remove the salt that spilled inside the machine. Measure the hardness of the supply water appropriately and check the water hardness setting. When placing the glasses and other glassware into the basket lean them not against other dishes but the edges or racks of the basket or the glass support tines. |
| Op glazen blijft een waas achter die lijkt op melksteen en die niet kan worden verwijderd door met de hand af te wissen. Een blauwachtige / regenboogachtige glans treedt op wanneer het glas tegen het licht wordt gehouden. | Excessief spoelmiddel wordt gebruikt of corrosie is opgetreden op het glas als gevolg van zacht water | Verlaag de instelling van het spoelmiddel. Maak het gemorste spoelmiddel schoon wanneer u spoelmiddel toevoegt. Meet de hardheid van het leidingwater op passende wijze en controleer de instelling van de waterhardheid. Als uw leidingwater zacht is (<5 dH), gebruik geen zout. Kies programma's die bij hogere temperaturen wassen (bijv. 60-65°C). U kunt ook commercieel verkrijgbare glazenbescherming reinigingsmiddelen gebruiken. |
Community-vragen
Stel een vraag
De foutcodes zijn afkomstig uit de officiële handleiding van de fabrikant.