Dirt Devil BG74
Stofzuiger · 18 Probleemoplossingen
Probleemoplossing - Dirt Devil BG74
Veelvoorkomende problemen en oplossingen - ook zonder foutcode op het display.
Overige problemen 8
| Probleem | Oorzaak | Oplossing |
|---|---|---|
| Het apparaat stopt plotseling met zuigen. Wat moet ik doen? | ||
Onderhoud & Verzorging 6
| Probleem | Oorzaak | Oplossing |
|---|---|---|
| Despite perfect operation, the suction result is not satisfactory | The installed nozzle is not suitable | Replace the nozzle, see Chapter 2.1 'Assembly of the appliance and adaptation of nozzles to the floor' |
| The dust bag replacement indicator appears in the window (Fig. 26) | The dust bag is full | Replace the dust bag, see Chapter 3.1 'Replacement of the dust bag' |
| The dust bag replacement indicator appears in the window (Fig. 26) | The filters are dirty | Clean the respective filter, see Chapter 3.2 'Cleaning/replacement of the motor protection filter' or Chapter 3.3 'Cleaning/replacement of the exhaust air filter' |
| The appliance suddenly stops suctioning | The nozzle, telescopic tube or suction hose is clogged | Remove the blockage if necessary using a long stick (e.g. a broom handle) |
| The appliance suddenly stops suctioning | The dust bag is full | Replace the dust bag, see Chapter 3.1 'Replacement of the dust bag' |
| The appliance suddenly stops suctioning | The filters are dirty | Clean the respective filter, see Chapter 3.2 'Cleaning/replacement of the motor protection filter' or Chapter 3.3 'Cleaning/replacement of the exhaust air filter' |
Prestaties & Werking 3
| Probleem | Oorzaak | Oplossing |
|---|---|---|
| Despite perfect operation, the suction result is not satisfactory | The secondary air regulator (Fig. 10) is open | Close the secondary air regulator (Fig. 10) |
| Despite perfect operation, the suction result is not satisfactory | Position of the suction power regulator is not suitable (Fig. 19) | Adjust the position of the suction power regulator (Fig. 19) |
| Despite perfect operation, the suction result is not satisfactory | The brush crown of the floor nozzle is in an unsuitable position for the floor covering (Fig. 6-7) | Use the floor nozzle selector to adjust the position of the brush crown to the floor covering (Fig. 6-7) |
Temperatuurproblemen 1
| Probleem | Oorzaak | Oplossing |
|---|---|---|
| The appliance suddenly stops suctioning | The overheating protection has been activated (possibly due to clogged suction lines or other reasons) | 1. Switch off the appliance and unplug the power cord. 2. Remove the cause of overheating (e.g. disassemble the telescopic tube and suction hose and remove blockages). 3. Wait approximately 45 minutes for the appliance to cool down. 4. The cooled appliance can now be switched on again |
Community-vragen
Stel een vraag
De foutcodes zijn afkomstig uit de officiële handleiding van de fabrikant.
Bezoek de officiële Dirt Devil website voor actuele informatie en ondersteuning.