Wat betekent foutcode NO WATER bij Stylies Mira?

Water tank is empty or water level sensor not detecting water. Oplossing: Check if the water tank is properly filled and correctly positioned on the device base. Verify that the upper part of the humidifier is properly seated on its base.

Stylies Mira Foutcodes

Foutcodes - Stylies Mira

Deze codes worden op het display van uw apparaat weergegeven wanneer er een probleem wordt gedetecteerd.

1 van 1

Foutcode	Beschrijving	Oplossing	Ernst
NO WATER WAARSCHUWING	Water tank is empty or water level sensor not detecting water	Check if the water tank is properly filled and correctly positioned on the device base. Verify that the upper part of the humidifier is properly seated on its base.	WAARSCHUWING

Probleemoplossing - Stylies Mira

Veelvoorkomende problemen en oplossingen - ook zonder foutcode op het display.

15 van 15

Overige problemen 10

Probleem	Oorzaak	Oplossing

Installatie & Opstelling 1

Probleem	Oorzaak	Oplossing
NO WATER display appears but water tank is filled and fan is not working	Upper cover of the humidifier is not properly positioned on the base	Check that the upper part of the humidifier is correctly seated on its base and that safety contacts are engaged

Onderhoud & Verzorging 1

Probleem	Oorzaak	Oplossing
Device is not operating properly	Device requires maintenance or cleaning; humidity level in room is already high	Perform maintenance and clean the humidifier as described in the cleaning chapter. If room humidity is already high, the humidifier will reduce moisture output automatically

Prestaties & Werking 2

Probleem	Oorzaak	Oplossing
Humidification is only partially effective	Room has drafts or is very tall with open windows	Close windows and doors to eliminate drafts; ensure the room is properly sealed for optimal humidification
Hygrostat readings seem inaccurate	Standard tolerance of built-in hygrostat is ±10%	The actual relative humidity may differ from the displayed reading by approximately ±10%. This is normal operation

Waterproblemen 1

Probleem	Oorzaak	Oplossing
Excessive condensation occurring	Humidity level has increased too much as air temperature rises	Remember that humidity increases with rising air temperature. Monitor room humidity levels and adjust device usage accordingly. Recommended indoor humidity: 50-60%

Community-vragen

Stel een vraag

De foutcodes zijn afkomstig uit de officiële handleiding van de fabrikant. Bezoek de officiële Stylies website voor actuele informatie en ondersteuning.