Siemens HQ 745526 E
Kookplaten en fornuizen · 17 Probleemoplossingen
Probleemoplossing - Siemens HQ 745526 E
Veelvoorkomende problemen en oplossingen - ook zonder foutcode op het display.
Overige problemen 8
| Probleem | Oorzaak | Oplossing |
|---|---|---|
Onderhoud & Verzorging 4
| Probleem | Oorzaak | Oplossing |
|---|---|---|
| Oven lamp does not work | Lamp burned out or damaged | 1. Make sure the appliance is not connected to the electrical supply. 2. Inside the oven, loosen the glass cover. 3. Unscrew the damaged lamp. 4. Install a new replacement lamp. |
| Stainless steel surfaces with stains or oxidation | Cleaning with inappropriate products or not dried correctly | 1. Use a soft cloth moistened with water and liquid dishwashing detergent. 2. Wipe the cloth in the same direction as the steel grain. 3. For stubborn dirt, use alcohol. 4. Finally, rinse thoroughly with water and dry carefully with a soft cloth. 5. You can use specific stainless steel products to enhance shine. |
| Enameled, chromated or glass parts damaged during cleaning | Use of abrasive powders or corrosive substances | 1. Clean only with warm water. 2. Do not use abrasive powders or corrosive substances. 3. For dirt, use a soft cloth with mild liquid detergent. |
| Interior of oven dirty or with residues | Lack of regular cleaning after use | 1. The appliance must be disconnected from the electrical supply before starting cleaning. 2. Avoid cleaning parts that are still hot. 3. Clean the oven interior preferably after each use with warm water and detergent. 4. Rinse carefully and dry with care. |
Prestaties & Werking 1
| Probleem | Oorzaak | Oplossing |
|---|---|---|
| Rotary spit does not work correctly | Spit not correctly inserted into motor or shaft not aligned | 1. Position support A on the third level from bottom to top. 2. Insert shaft 'C' into hole 'G' of the spit motor. 3. Rotate the spit shaft to ensure better fit. 4. Before closing the door, make sure shaft 'C' fits correctly into hole 'G'. |
Stroomvoorziening & Elektronica 1
| Probleem | Oorzaak | Oplossing |
|---|---|---|
| Child safety lock was unlocked after power failure | Electrical power failure | 1. In case of power failure, the child safety lock setting is automatically cancelled. 2. Reactivate the lock: Press the key button until the lock symbol appears (takes approximately 4 seconds). |
Temperatuurproblemen 3
| Probleem | Oorzaak | Oplossing |
|---|---|---|
| Oven heats up insufficiently quickly | Air circulation function not selected | 1. Turn the regulation button 'H' to position 4 (Hot air circulation - circular heating + ventilation). 2. The oven will heat up much faster with this function. 3. Food can be inserted into the oven as soon as it is switched on, without needing to wait for preheating. |
| Food does not cook uniformly | Multiple levels being used simultaneously or incorrect function selected | 1. For normal cooking/roasting (roasts, cookies), use function 3 (upper and lower heat). 2. Insert food only when the oven has reached the set temperature. 3. For cooking, preferably use only one level. 4. To cook on two levels at the same time, use function 4 (Air circulation with ventilation). |
| Grill does not heat sufficiently in the upper part | Oven door open during grill operation | 1. Keep the oven door closed while the grill is being used. 2. The grill function uses higher heating power so that grilling gains color more quickly in the upper part. |
Community-vragen
Stel een vraag
De foutcodes zijn afkomstig uit de officiële handleiding van de fabrikant.