Candy CDI 22E10

Overige problemen 8

Probleem	Oorzaak	Oplossing

3 meer tonen

Onderhoud & Verzorging 2

Probleem	Oorzaak	Oplossing
Detergent not dispensed or partially dispensed	Cutlery, dishes, pans, etc. stop the detergent dispenser opening	Position dishes not to obstruct the dispenser
De bodem of rand van steelpannen zijn niet goed schoongemaakt	Aangekoekte voedselresten, steelpannen niet correct gepositioneerd	Aangekoekte voedselresten moeten worden ingeweekt voordat pannen in de vaatwasser worden gezet, herpositioneer steelpannen

Geluiden & Trillingen 1

Probleem	Oorzaak	Oplossing
Noise during wash	Dishes knock against one another, revolving arms knock against the dishes	Re-check loading of dishes in the basket carefully

Prestaties & Werking 3

Probleem	Oorzaak	Oplossing
Spray arms are not heard to rotate	Item prevents arms from rotating, plate and cup filter very dirty	Check loading, clean plate and cup filter
Load of dishes is only partially washed	Dishes have not been properly loaded, dishes placed too closely together, spray arms are partially blocked, incorrect amount of detergent, detergent is old and hard, wash programme is not thorough enough, lower basket dishes not washed	Do not place the dishes too closely together, remove spray arms by unscrewing ring nuts clockwise and wash under running water, increase the measure of detergent according to how dirty the dishes are and change detergent, choose a more vigorous programme, depress half load button
De schotels zijn aan het einde van het wasprogramma niet volledig droog	Onvoldoende luchtcirculatie, glansmiddel ontbreekt	Laat de deur van de vaatwasser op een kier staan zodat de schotels natuurlijk kunnen drogen, vul de glansmiddeldispenser

Stroomvoorziening & Elektronica 2

Probleem	Oorzaak	Oplossing
Machine completely dead	Plug is not connected to wall socket, O/I button has not been pressed, door is open, no electricity	Connect electric plug, press O/I button, close door, check the fuse in the plug and the electricity supply
One or more indicator lights flashing quickly	Water inlet tap turned off	Switch off the appliance, turn on the tap, reset the cycle. If the malfunction continues contact a Service Centre

Waterproblemen 4

Probleem	Oorzaak	Oplossing
Machine does not draw water	Water tap is turned off, programme selector is not at correct position, inlet hose is bent, inlet hose filter is not correctly connected, filter is dirty	Turn water tap on, turn programme selector to correct position, eliminate the bends in the hose, clean the filter at the end of the hose, clean filter
Machine does not discharge water	Outlet hose is kinked, outlet hose extension is not correctly connected, outlet connection on the wall is pointing downwards not upwards	Straighten outlet hose, follow the instructions for connecting the outlet hose, call a qualified technician
Machine discharges water continuously	Position of outlet hose is too low, excessive amount of detergent	Lift outlet hose to at least 40 cm above floor level, reduce amount of detergent
Presence of white spots on dishes	Water is too hard, rinse aid missing or insufficient	Check salt and rinse aid level and regulate amount. If the fault persists, contact Service Centre